修改XP启动界面（Modify the XP startup interface）.doc

修改XP启动界面（Modify the XP startup interface） First, modify the winXP Pro installation interface The installation interface that is installed complete copying system files, restart the installation interface into the interface, the residence time is longer, a change worth for appreciation, copied winXP Pro installation files to your hard disk, click the i386 directory winntbbu.dl_; copy to a place, and then open the winntbbu.dl_ winRAR drag a file system, winntbbu.dll (EXESCOPR; also can modify the resources, but by the bitmap 300KB within the size limit) so you dont have the tools. (1), with ResourceHacker open winntbbu.dll, found in 1033 in 103 (English version) and delete it, to replace the 2052 (Chinese version), and then build a resource, resources bitmap resource name is 103, 1033 is the language resources, so it is replaced successfully; the two bitmaps are put up, the rest is 153, the two is the same way as to replace the bitmap on the line!!! (2), modify the winntbbu.dll file, you can take it to generate winntbbu.dl_ files, making method is to modify the good winntbbu.dll in the root directory (such as C, winXP into DOS, the cursor to drive, through the makecab command: makecab winntbbu.dll winntbbu.dl_ in C can generate a winntbbu.dl_ file!!!! (3) in the process of replacement, there may be errors, and generally are not carried out by steps or pictures caused by non-standard, try more can. In addition, the modified file may be large, or different from the original Microsoft, but the installation will generally not be wrong. (4) if the system has been installed, you can find the file winntbbu.dll under the windows\system32 of the system. After the system is installed, it has not been deleted, but the decompression is put here. Two, modify the winXP Pro boot screen The boot screen is installed winXP PRO system, the rolling screen appears when the screen to open the machine, the main is to modify the Ntoskrnl.ex_ file, the same, also in the i386 for ntoskrnl.ex_,