完美解码设置（Perfect codec settings）.docVIP

完美解码设置（Perfect codec settings） Exit the perfect decoding player, and then start the perfect decoding settings center. 2. in the decoding switch label can be set up in the decoding scheme: click the decoding mode corresponding to the triangular frame drop-down button, you can see several Dior brother preset, select a selected, click ok. 3. if you want to change the program, please let go of the automatic mode hook, and then the corresponding triangle drop-down button, you need to select separator decoder (codec in parentheses after the DXVA is hardware acceleration means, namely open hardware solution), choose ok. Note: after installation, if you do not set the default program. Typically, the default scenario is used for OK! If you find that the default program has problems playing some files, you can change the decoding scheme yourself, or you can refer to the decoding scheme below. You can feel it, you can feel it Two, recommendation program (test environment: A card, XP system [see Appendix 4]): In order to find a solution that can kill all kinds of formats, we tested various formats of video files (TS, TP, M2TS, EVO, MPG, AVI, WMV, MKV, MOV, RMVB, RM...) I think the following 3 sets of decoding scheme is very good (see pictures in attachment 1 and 2), we can try! - according to relevant requirements, Windows Media Player has been upgraded to 11; the machine configuration is shown in attachment 4. - A player is set to start, exit, in the decoding mode and select video encoding to remove the hook and the player automatic mode to The KMPlayer to AVI separator to KMP, MPEG2 TS/PS built-in separator to Gabest to H.264 video decoder to CoreAVC to the first box audio decoder output to FFDShow, the second frame changed into 2.1 stereo, click VC-1 video decoder corresponding to the WMV configuration hardware acceleration of the hook, set the disabled. Sure, sure. Scheme two: exit player, set to start the center, in the decoding mode and select video player HDTV (PowerDVD