更改说明（Change description）.docVIP

更改说明（Change description） 2006-12-22: uses the notation to determine whether the train has passed or not to use the board counter 2006-12-23: malfunction on board The 2006-12-28: train has been delayed and changed to 10s 2006-12-29: uses the XML configuration file to read and write, and modifies the onboard fault function 2007-01-03: modify find maximum function 2007-01-04: modify the roll slip judgment function, adjust the variable position train-thread 2007-01-09: modifies the IO card function, about clearIRQ 2007-01-16: adds a function declaration that increases the problem of repeated points in the AD card during the passing of the vehicle. 2007-05-17: changes the overall acquisition mode from the original practice response to message delivery. 2007-05-28: automatically generates folders. 2007-05-28: adjusts up and down symbols and replaces up/down with array [0][1]. 2007-05-31: adds debug window for debug output. 2007-08-07: adjust the display mode, do not show repeated information when passing the car. The disk path problem in 2007-08-07: correction of photon calibration curve. 2007-08-08: storage waveform BUFF, expansion from 15MB to 32MB, processing waveform BUFF expansion, from 2048 axis to 100000. Prevents the magnetic steel interference to produce the wrong wave shape. 2007-08-08: increases the handling of abnormal cars (0 of the total number of axes), and forms an error flag in the passing data. ----------------------------------------------------------------------------------------------------------------------------- 2008-01-07: switch to the protection of the switch to 4 judgments, the interface to increase the temperature of the target display. 2008-01-20: adjusts the judgement of the shape of the magnetic steel wave and increases the fault tolerance. 2008-02-14: treatment increased Yuanwang license plate number, modify the XML file, a car and a corresponding message, will increase the number of information to 20 bytes. 2008-02-15: increases the proce