解决您可以安全地关机了（You can safely switch off）.docVIP

解决您可以安全地关机了（You can safely switch off） You can safely switch off In some computer shut down the computer, find the standby is not available, but after the closure has been stuck in the you can safely turn off the computer now, need to manually press the power switch to turn off the computer, how to make the computer automatically shut down in a one-time recovery? [Methods 1] Device Manager / computer --Stsndard PC-- attribute -- driver -- update driver -- upgrade device driver wizard displays a list of known -- device driver -- show all hardware categories all the equipment / put into standard compatible hardware -- standard computer (Advanced Configuration and Power Interface (ACPI) PC 1, most of the computer motherboards now have this setup, not modified, only some old motherboards will do so 2, in that case, advanced power management will show up HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\Current Version\Winlogon branch, or find a new REG_SZ type registry keys in the right pane, double-click the name as PowerdownAfterShutdown, its value is set to 0 (0 to allow the power off automatically, 1 are not allowed to shut off the power supply automatically), after the completion of the exit registry editor, restart the computer. [methods two] Control panel - -- -- power performance to enable advanced power management (W2K/XP system uses this method 100%) [methods three] Enter CMOS-- and set it in POWER MANAGEMENT: Power After Pwp-Tail (ON--OFF) Wake-up, by, PCI, Card (ON--OFF) Powre, on, by, Ring (ON--OFF) [methods four] Win98 is installed with the Setup command, so ACPI may not be installed. If you want Win98 to install ACPI, you must install it with Setup/pj. In case you dont use the PJ parameter, you dont have to reinstall Win98 so much trouble. You can try to do this: Open the system properties, in the equipment management in the system select plug and play BIOS, and view its properties, and then click the driver of the page, press the update driver bu