fluke性能指标（Fluke performance index）.docVIP

fluke性能指标（Fluke performance index） Performance index of integrated wiring channel transmission Transmission performance index of balanced cable channel According to the international Cabling Standard ISO/IEC11801:1995 (E), the parameters of the balanced cable transmission channel (Balanced, cabling, links) are given. These parameters are adapted to shielded and unshielded transmission channels of balanced cables unless special emphasis is placed on them. The electrical characteristic parameters to describe the transmission performance of balanced cable channels have DC loop resistance and characteristic impedance, attenuation, near end crosstalk loss and attenuation to crosstalk ratio, structure return loss, transmission delay, parameters associated with the channel length, such as attenuation, DC loop resistance and transmission delay; and cable distance parameters related to the new have the characteristic impedance, attenuation, near end crosstalk loss and echo structure etc.. However, once the cable has been formed, these parameters are only related to the installation process of the cables and associated hardware. 1) characteristic impedance Characteristic impedance is the main characteristic of a transmission channel consisting of cables and associated hardware. According to the physical characteristics of the signal transmission, it forms a hindrance to the signal transmission. It describes the characteristic impedance with the resistance and reactance. Measure with Ohm (omega). The characteristic impedance changes of the balanced cable channel are described by the structural return loss. In order to ensure the characteristic impedance of the application system channel, a proper design and proper cable and related connection hardware are required. 2) structure return loss (Structural, Return, Loss) It is a measure of channel consistency. The characteristic impedance of the channel varies with the frequency of the signal. If the cable used by the channel does