fpc设计规则及流程和电路抗干扰设计（FPC design rules and processes and circuit anti-interference design）.docVIP

fpc设计规则及流程和电路抗干扰设计（FPC design rules and processes and circuit anti-interference design） Anti interference design of digital circuit Design flow: Evaluation of 1.FPC OUTLINE. 2.sensor routing and main chip selection. 3. schematic diagram and layout. 4. check the structure, reinforcement, components and ACF location, layer, silk screen (components, direction, logo, etc.). 5. out of GERBER, Mount document review. 6. FPC structure drawing and check with engineering drawing. In the design of electronic system, in order to avoid detours and save time, we should fully consider and meet the requirements of anti-interference, and avoid the remedial measures after the design is completed. There are three basic elements of interference: (1) an interference source, an element, a device, or a signal that produces interference, described in mathematical language as follows: du/dt, di/dt, is the source of interference. Such as: lightning, relay, SCR, motor, high-frequency clock, etc., may become interference source. (2) propagation path refers to the channel or medium that interferes with transmission from sensitive sources to sensitive devices. The typical propagation path of interference is through the conduction of wires and the radiation of space. (3) a sensitive device refers to an object that is easily disturbed. Such as: A/D, D/A converter, microcontroller, digital IC, weak signal amplifier, etc.. The basic principle of anti-interference design is to restrain the interference source, cut off the interference propagation path, and improve the anti-interference performance of the sensitive device. (similar to the prevention of infectious diseases) 1 suppression of interference sources The interference suppression source is to minimize the du/dt of the interference source, di/dt. This is the highest priority and the most important principle in the anti-jamming design, and it often gets twice the result with half the effort. The du/dt of the interference reduction source is mai