电脑电源常见问题的详细解答汇总（Computer power FAQ）.docVIP

电脑电源常见问题的详细解答汇总（Computer power FAQ） Computer power FAQ Now, the power supply in power on the 350W, so much power useful? A: the power market is indeed developing towards high power output. Although under normal working conditions, the power consumption of the whole machine is only about 250W (higher configuration). But because the PC machine starts, the instantaneous power consumption will be great. In order to ensure this moment, we need to select a power supply which is larger than the power consumption of accessories. In addition, a power supply in full load case, the parameters will be less than 60% or 70% of the output parameters. Of course, a power source that works all the time under its own load will have a big impact on its life. Therefore, in order to make the whole machine more stable, it is necessary to choose a high-power power supply. I heard that some DIY power transformation is to increase the heat sink in the power supply, power output power will increase some. Answer: power supply is a typical bottleneck effect. The power of the power supply is determined by the power capacity of the transformer, the parameters of the various power tubes and the heat dissipation conditions, and is determined by the lowest of them. If the transformer and the power pipe have a margin, then increasing the heat sink will make the output power rise. But if the bottleneck is not in the heat, it is useless to increase the heat sink, but it will help to reduce noise. Power volume, why not make it smaller?. Answer: power volume is specified by Intel, which takes into account the motherboard and chassis factors at the appointed time, so it is almost impossible for power suppliers to change power size without permission. The PC machine is out of power. The case shell will be electrified. Is it caused by power supply? Answer: power supply as a whole source of power, the computer all about electricity problems are from the power supply. As for the problem of leakage in the prob