cad中级考试（CAD intermediate examination）.docVIP

cad中级考试（CAD intermediate examination） CAD intermediate examination questions (theory and practice) CAD theory questions bank (including computer, CAD, mechanical knowledge) First, non - questions, judgment questions The 1.AutoCAD icons menu bar can be customized, can be deleted or added. (to) 2.AutoCAD is a computer graphics software for Autodesk Corporation in the United states. (to) 3. in CAD, you can use the mouse button to replace the zoom and rotate operations in the icon menu. (to) 4., all commands can be programmed with keyboard input (that is, shortcuts) to improve the drawing system, and letters in the shortcut can be defined by the user himself. (to) 5. orthogonal lines refer to horizontal and vertical lines. (wrong) The 6. orthogonal line refers to the line drawn in the orthogonal manner. (to) 7. the use of graphical editing commands (such as mobile and array) can be the first point of command, select graphics, also can first choose graphics, and then command. (to) 8. when an external block command is used, the reference portion changes as the outer block graph changes. (wrong) 9. when creating the pattern fill, the elected area takes 1 of the proportion, indicating that the spacing of the lines filling the pattern is 1. (wrong) Compared with the conventional design method, the 10.CAD design is advantageous to the standardization, breakdown and generalization of the product. (to) 11. in mechanical drawing, GB/T is the code of the recommended national standard, which is generally referred to as national standard (mistake) 12. national standards. The width of A4 drawing is 210X297, and the width of the drawing of A3 is 295X420 (right) 13. in standard drawing, each drawing should draw a title column, and the title bar should be placed in the lower right corner of the pattern (right) 14. in mechanical drawings, the ratio of 2:1 becomes an enlarged proportion, such as the size of the object is 10, then the figure in the drawing should be painted 5 (wrong) 15.