退火对纳米Al2O粒子弥散强化铜合金显微组织与性能的影响.PDF

24 2 矿　冶　工　程 Vol.24 №2 2004 04 MINING AND M TALLURGICAL NGIN RING April 2004 Al O 2 3 1, 2 1 1 1 谭　望 , 汪明朴, 程建奕, 李　周 (1. , 410083;2., 412000) 　:、、Cu-Al O 2 3 。:, σσ , δ, 。92%, σ、 b 0.2 b σ 、δ490 MPa、485 MPa、10%91.4%IACS, 400～ 1 050 ℃。 0.2 900 ℃, 1 h , 。。 :Cu-Al O ;;;; 2 3 :TG113,TG146.11 :A :0253-6099-(2004)02-0075-03 Influence of Annealing on Microstructure and Properties of Nano-sized Al O Dispersion Strengthened Copper Alloy 2 3 1, 2 1 1 1 TAN Wang , WANG Ming-pu , CH NG Jian-yi , LI Zhou (1.College of Materials Science and Engineering , Central South University , Changsha 410083, Hunan, China ; 2.Zhuzhou Cemented Carbide Group Co Ltd, Zhuzhou 412000, Hunan, China ) Abstract:The influence of annealing on the microstructure and properties of nano-sized Al O dispersion-strengthened copper 2 3 alloy are investigated by measurement of mechanical and electrical properties, metallugraphic analysis and electronmicroscopic obsorvation.The results have shown thatwith increasing of cold-drawing deformation, the extruded alloys σandσ increase b 0.2 and δdecreasesgradually, whereas the extruded alloys electrical conductivity changesvery little.After the alloys cold-draw- ing deform