油墨(BM)组分和其在CG产品上的应用Paint (BM) components and its application in touch sensor products.pdf

Dr Saludin Paint elements and its …… Content : Introduction Paint Elements Color Matching and Color Control Curing Testing Paint Materials 报告内容： Paint Film Defect 引言 Cases and study 油墨组成 颜色匹配及控制 固化 油墨材料的测试 油墨层缺陷 案例学习 Introduction 引言 A coating is applied to a part to enhance its appearance (such as applied to CG product) and /or also to protect the substrate material. An organic coating will act as a physical barrier to moisture, The adhesion of the coating depend on the preparation of the surface. Part preparation is often referred to as pretreatment. 涂层作用是增强基板的外观(比如CG上的油墨)，或用来保护 基板材料。有机涂层充当着水分的物理障碍层，涂层的附着 力取决于表面准备的情况。基板表面的准备情况通常被称为 预处理。 The term pretreatment is used to define the mechanical or chemical surface treatment for a manufactured product, referred to as the substrate, to clean it, and prepare it for the application of a coating. Pretreatment can be accomplished in many different ways. For example, sanding a part to remove dirt is a simple mechanical method of part preparation. Chemical pretreatment may be as simple as a solvent wipe, or it may be a multistage spray washer that cleans the part and applies a conversion coating. The specific method and degree of pretreatment used depends on quality requirements of the product. 预处理指用机械的，化学的方法对加工产品的表面进行处理， 一般是指对基板表面进行清洁，以便于涂布。预处理的方法 有很多种。例如，简单的物理方法-打磨-除去脏污；化学预 处理可以是简单的溶剂擦拭，也可能是采用多级喷雾清洗机 清洁。实际