空压机释疑（Air compressor construction）.docVIP

空压机释疑（Air compressor construction） Modification of LW15-252 switch CQ6 pneumatic mechanism News source: electronic market release time: 2006, 09, 28 High voltage switch is an important control and protection device in electric power system. The operating mechanism is an important part of high voltage switch. It is used for switching, switching on and closing the switch. At present, the high voltage switch is mainly composed of electromagnetic, spring, compressed air, hydraulic and hydraulic spring type. According to statistics, more than 70% of the obstacles of the high voltage switch are the operating mechanism failure, so the maintenance work of the high voltage switch should be placed on the operating mechanism. 1 LW15-252 switch type CQ6 pneumatic mechanism brief introduction CQ6 type pneumatic mechanism is a kind of operating mechanism which uses compressed air as the braking power and the closing spring as the closing energy storage element. During the switching process, the energy storage of the closing spring is carried out by the cylinder piston, and the mechanical switch element is used to make the contact to complete the braking operation, and the closing spring is kept in the energy storage state through the locking system. When closing, the latch is released by means of magnetic force, and the spring releases energy, so that the contact is completed by the mechanical transfer unit. The compressed air system consists of air compressor, compressed air pipe, compressed air tank, air pressure switch, air pressure gauge, a safety valve, exhaust pipe, plug, check valve, drain valve etc.. Air compressor with a non-return valve to the compressed air tank into the high-pressure air, the air pressure by compressed air pipe into the air pressure switch, air pressure gauge and safety valve, related control, measurement and protection. Air compressor with unloading valve in Germany, when the air compressor starts, the electromagnetic valve is closed, the air compres