iccavr错误解释（Iccavr misinterpretation）.docVIP

iccavr错误解释（Iccavr misinterpretation） Reference: /dapaopao/blog/item/e6e0b87ee33bae3c0dd7dad7.html When a novice programmer USES the ICC, there are often errors that now make the common error report as follows. Here are some of the mistakes I made to show you, and you are welcome to provide the mistakes youve encountered. In no particular order: First, normal compilation passes CODE: C: \ ICC \ bin \ imakew - f main mak Iccavr-c-ic: \ ICC \ include \ -datmega - DATMEGA 16 - l-g-mavr_enhanced D: \ desktop \ experimental tutorial \ LED application \ neon lamp \ main.c Iccavr-o main-lc: \ ICC \ lib \ - g-ucrtatmega. O - bfunc_lit: 0x440-dram_end: 0x45f-bdata: 0x60. 0x45f-dhwstk_size: 16-beeprom: 1.512-fihx_coff-s2 @main.lk - lcatmega Device 1% full. Done. [Copy to clipboard] This is what we most want to see, and all is well. Not included in the project. C file CODE: C: \ ICC \ bin \ imakew - f main mak Iccavr-o main-lc: \ ICC \ lib \ - g-ucrtatmega. O - bfunc_lit: 0x440-dram_end: 0x45f-bdata: 0x60. 0x45f-dhwstk_size: 16-beeprom: 1.512-fihx_coff-s2 @main.lk - lcatmega Unknown file type @main.lk, passed to linker ! ERROR unknown file type @main.lk C: \ ICC \ bin \ imakew exe: the Error code 1 Done: there are error (s).exit code: 1 [Copy to clipboard] Solution: ADD your program to the project, and you can right-click in the program area ADD to project The program has no suffix name, or the suffix name is incorrect. CODE: C: \ ICC \ bin \ imakew - f main mak C: \ ICC \ bin \ imakew.exe: main is up to date Done. [Copy to clipboard] This is a difficult error to understand, which is caused by the program file in the project without the suffix name. Solution: remove the original file from the project, change the suffix name of the file to.c, and then add the project. 4. There is no main function CODE: C: \ ICC \ bin \ imakew - f main mak Iccavr-c-ic: \ ICC \ include \ -datmega - DATMEGA 16 - l-g-mavr_enhanced D: \ desktop \ experimental tutorial \ LED application \ neon lamp