网络技术基础实验作业.docxVIP

What is the IP address and TCP port number used by your client computer (source) to transfer the file to ?client computer (source)：IP address：1 TCP port number：2013What is the IP address of ? On what port number is it sending and receiving TCP segments for this connection?the IP address of ：IP address：2 port number：80What is the sequence number of the TCP SYN segment used to initiate the TCP connection between the client computer and the server? What is it in the segment that identifies the segment as a SYN segment? sequence number:0 ；SYN被设置为1说明是SYN段。What is the sequence number of the SYNACK segment sent by the server to the client in reply to the SYN? What is the value of the ACKnowledgement field in the SYNACK segment? How did the server determine that value? What is it in the segment that identifies the segment as a SYNACK segment? The sequence number of the SYNACK segment sent by is:0； SYNACK segment 中 ACK的值为1；ACK number的值为SYN消息中sequence number加上1所得； SYN 和Ack flag都置为1说明这是一个SYNACK segment.What is the sequence number of the TCP segment containing the HTTP POST command? Note that in order to find the POST command, you’ll need to dig into the packet content field ,looking for a segment with a “POST” within its DATA field. 第257号报文段是包含 HTTP POST 命令的TCP segment.且报文段的序列号为1.6. Consider the HTTP POST as the first segment in the TCP connection. What are the sequence numbers of the first six segments in the TCP connection (including the segment containing the HTTP POST)? At what time was each segment sent? When was the ACK for each segment received? what is the RTT value for each of the six segments? What is the EstimatedRTT value after the receipt of each ACK? Assume that the value of the EstimatedRTT is equal to the measured RTT for the first segment, and then is computed using the EstimatedRTT equation on textbook for all subsequent segments. Note: wireshark has a nice feature that allows you to plot the RTT for each of the TCP segments sent. Select a TCP se