RCRCM 电动台风装配说明书 - Shopify.PDF

RCRCM 电动台风装配说明书 RCRCM Electric Typhoon Assembly Instructions 一：产品细节图 (The detail pictures of electric typhoon) 二：装配过程 (Assembly process) 1: 固定摇臂，确保摇臂不松动且足够坚固。 First, install the control horn to make it strong enough and not loose. 2: 将推拉杆铁夹头扣在摇臂上。 Second, connect the clevis into control horn. 3 ：用铁钩把舵机延长线穿入机翼，并与舵机线连接好，然后固定舵机，盖上舵 机盖。 Third, let the wiring harness go through the wings, and connect wiring harness with servo wiring well, then fix the servo and cover the servo cover. 4 ：分别固定方向舵和升降舵舵机，并打两个孔留出升降舵和方向舵推拉杆的位 置。 Fourth, fix the servos of rudder and elevator, and make two holes help the push rods come through. ：截去炭杆多余的部分，保留合适的长度 然后将金属推拉杆固定在炭杆内 5 。 。 Fifth, cut off the extra parts of the carbon pushrods and retain the suitable length, then fasten the linkage rods into carbon pushrods. 6 ：将推拉杆从打好的孔中穿进去，并将推拉杆两侧的铁夹头扣在摇臂上。 Sixth, let the pushrods come through the holes, and connect the clevis on pushrods with control horn. 7：组合水平尾翼部分。 Seventh, assemble the tailplane. 8 ：固定电机座，并安装电机和整流罩。 Eighth, fix the motor mount, then install motor and spinner. 9：将各部分组合，完成安装。 Ninth, assemble all the parts, and complete installation.