分区格式转换（Partition format conversion）.docVIP

分区格式转换（Partition format conversion） The Windows XP itself supports the NTFS partition, which uses NTFS partitions with greater security and disk management than any other partition format. The installation of Windows XP, the system will automatically let you choose whether or not the existing partition into a NTFS partition, if there were no choice, and now want the hard disk to NTFS, in addition to the use of Partition tools such as Magic software, in fact, there is a more simple and practical method. 1. start, run, CMD prompt (this is a XP like interface built in Windows DOS, and all the internal instructions are basically the same as those under DOS). 2. after opening the window, enter convert C:/FS:NTFS at the cursor prompt, and then enter. Note that there is a space at the back of covert. 3. then the system will ask you to enter the C label, then press enter. Label in the my computer middle C drive, and then look at its properties can be found. This allows you to simply change the partition format to NTFS. This method is used only for FAT32 to NTFS, and cannot change NTFS to FAT32 NTFS is the standard filesystem for Windows, NT, and later Windows 2000, Windows, XP, Windows, Server 2003, Windows, Server 2008, Windows, Vista, and Windows 7. Instead of the file allocation table (FAT) file system, NTFS provides file systems for Microsofts Windows series operating system. The NTFS of FAT and HPFS (high performance file system) made some improvements, for example, support metadata, and the use of advanced data structure, in order to improve the performance, reliability and disk space utilization, and provides some additional extensions, such as access control list (ACL) and log file system. The detailed definition of the file system belongs to commercial secrets, but Microsoft has registered it as an intellectual property product. NTFS data recovery The failures and solutions caused by NTFS in the erection of the website NTFS overview NTFS features Advantages of NTFS