变电站接地（Substation grounding）.docVIP

变电站接地（Substation grounding） Study on grounding system design of Substation 1 Preface Substation grounding net station connected with the high and low voltage electrical equipment grounding wire, low voltage system grounding, shield grounding, cable communication, computer monitoring and control system of substation equipment grounding, and maintenance of the temporary grounding. Grounding grid work (system) grounding, protective grounding, lightning protection and anti-static grounding and other purposes, it is to maintain safe and reliable operation of the substation, the fundamental guarantee for safe operation of electrical equipment and operating personnel and the important measures. If the grounding resistance is large, in the event of a power system grounding fault or other high current into the ground, may cause potential anomalies; if the grid grounding grid design is unreasonable, it may cause the grounding system of the uneven distribution of potential, local potential exceeds the safety value specified, this will give the operation personnel safety the threat, may also cause damage due to low back or two equipment and cable insulation, the high pressure into the control and protection system of substation monitoring and protection equipment will malfunction, refused to move, causing the accident, and even expand the accident, resulting in huge economic losses and social influence. Such an important grounding grid in the total investment in substation construction is often less than 1%, can be said to be insignificant, but must not ignore it, but to give it great attention. The construction of new projects should be less or less farmland, and good soil is a principle of our countrys basic construction at the present stage. Therefore, there are a lot of substations built in high soil resistivity areas. With the development of equipment and technology, substation layout, make full use of the site, the compact layout, the station covers an area of and a lot l