可用太阳能电池供电的锂电池充电管理芯片cn3065（Rechargeable battery management chip for solar cells powered by solar cells cn3065）.docVIP

可用太阳能电池供电的锂电池充电管理芯片cn3065（Rechargeable battery management chip for solar cells powered by solar cells cn3065） Pdf documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Such as rhyme electronic CONSONANCE Charging management chip for lithium battery powered by solar panel CN3065 Summary： CN3065 is a single lithium battery charge management chip that can be powered by solar panels. The device includes a power transistor that does not require an external current sense resistor and a blocking diode. 8 internal analog digital conversion circuit, can automatically adjust the charging current according to the current output capacity of the input voltage source, the user does not need to consider the worst case, can maximize the current output capacity of the input voltage source, very suitable for the use of lithium battery power supply voltage source solar panels output current limited charging applications. The CN3065 requires very few peripheral components and conforms to the USB bus technology specification and is well suited for portable applications. The thermal modulation circuit can control the chip temperature in a safe range when the power consumption of the device is relatively large or the environment temperature is relatively high. The internally fixed constant voltage charging voltage is 4.2V, and can also be adjusted by an external resistor. The charging current is set through an external resistor. When the input voltage drops, the CN3065 automatically enters a low-power sleep mode where the current consumption of the battery is less than 3 a. Other functions include low input voltage, latch up, automatic recharging, battery temperature monitoring, and charging status / charging end status instructions. The CN3065 uses a thermally enhanced 8 pin DFN package. Characteristic： The internal integrated 8 bit analog-to-digital conversion circuit, can automatically adjust