20石膏板吊顶工程（20 gypsum board ceiling works）.docVIP

20石膏板吊顶工程（20 gypsum board ceiling works） I. construction preparation (I) operating conditions 1, in the ceiling to be within the scope of the electrical and mechanical installation has been completed, all kinds of pipelines have been tested pressure qualified, has concealed acceptance. 2. The position of lights, vents and various lighting outlets have been determined. 3, the ceiling panels should be completed before the wall, ground and wet operation projects. 4, take good roof construction operation platform shelf. 5, light steel skeleton ceiling in a large area before construction, should be made model, the ceiling camber, light trough, curtain box, ventilation and so on place construction treatment, after identification, and then a large area construction. (two) material preparation Light steel keel, hanging rod, fittings, expansion bolts, screws, rivets, gypsum board, gypsum powder, paper tape, and entry inspection quality certificate. (three) construction tools; Profile cutting machine, electric curve saw, electric drill, electric hammer drill, tapping screws, portable electric sandpaper machine. Two, quality requirements (1) dark keel ceiling works; Quality requirements in line with the building decoration engineering quality acceptance specification (GB50210-2001) requirements. Table 3-14 Item entry check allowed or allowed Main control item 1 elevation, dimension, camber and shape 6.2.2 2 finishes material, section 6.2.3 3 installation of boom, keel and facing material, clause 6.2.4 4 boom, keel material, spacing and connection mode, section 6.2.5 5 gypsum board joint, section 6.2.6 General item 1 prefabricated component support position and method 6.2.7 2 install control sign section 6.2.8 3 hoisting of prefabricated parts, clause 6.2.9 4 temporary fixing measures and position correction, clause 6.2.10 5 allowable deviation of MM project of gypsum board metal plate, plastic board, mineral wool board template grille Surface smoothness 3222 Seam straightness