485是否用屏蔽线（485 shielding line）.docVIP

485是否用屏蔽线（485 shielding line） First, some concepts about the 485 bus: The communication distance between 1 and 485 buses can reach 1200 meters. According to the theory of 485 bus structure, the transmission distance of the 485 bus can reach 1200 meters under the ideal environment. The condition is high quality wire communication, the baud rate is 9600, only a 485 equipment load, in order to make the communication distance up to 1200 meters, so the actual bus usually 485 stable communication distance often reach 1200 meters. If the load of 485 equipment, wire impedance standard, line diameter is too small, poor quality converter, lightning protection equipment complex and baud rate factors will reduce the communication distance. 2 and 485 buses can communicate with 128 devices. In fact, not all of the 485 converter can carry 128 sets of equipment, to be judged according to the 485 converter chip models and 485 chip models, only in accordance with the indicators of the lower chip to determine the load capacity. Generally 485 chip load capacity has three levels - 32 units, 128 units and 256 units.. In addition, the nominal theory usually is not up to the long distance communication baud rate is higher, the line size is fine, the worse the quality of wire, the worse the quality of converter power supply, converter (passive converter), lightning protection is stronger, which will reduce the real load quantity. 3 and 485 bus is one of the simplest, most stable and mature industrial bus structure The concept is wrong. 485 bus is a kind of economical and traditional industrial bus used for equipment networking.. Its communication quality needs to be debugged and tested according to the construction experience, and the production can be guaranteed. 485 bus although simple, but also must strictly follow the installation construction specifications for wiring. Two, construction must be strictly in accordance with the specifications In the construction of the 485 bus system, co