cad使用经验(中)（CAD usage experience (medium)）.docVIP

cad使用经验(中)（CAD usage experience (medium)） CAD usage experience (middle).Txt AUTOCAD use the serial number four -- common command and shortcut key setting principles AUTOCAD software has a lot of commands, how to master some of the main commands, and the rational use of it? I often discuss with others, in CAD, to draw or edit a primitive, in general, there are several ways, as a qualified cad-drawer, should be the most appropriate use of the most appropriate method. Lets see what commands are in the CAD first We can divide them into several categories. One is the drawing class, the two is the edit class, the three is the setting class, and the four is other classes, including annotations, views, and so on. We analyze one class and one class. Class 1, drawing class. Common commands are: Line straight line Xline construction line (used to draw auxiliary lines) Mline double line (usually used in drawing wall lines, also can be defined by oneself using other lines) Pline polyline (most of the elements that consist of line segments, defined as polyline, are defined as polyline lines, so they are easier to choose) Rectang rectangle (actually four segments of polyline) Arc arc Circle circle Hatch fill (pay attention to the proportion of patterns) Boundary boundaries (used in areas such as calculation, area, fill, etc.) Block definition blocks (all primitives that are intended to be used to define blocks are placed on the 0 level, and all the other attributes are changed to bylayer) Insert inserts quickly (as compared with -insert, one will call up the dialog box, one will not) The second category, edit class. Common commands are: The Matchprop property matching (equivalent to the format brush in word is often used to brush the right primitives into the correct layer) Hatchedit fill pattern editor (double click the left mouse button to fill the pattern) Pedit polyline editing (also used to connect segments of a line from one end to another) Erase erase Copy copy Mirror mirro