消防系统知识（Fire system knowledge）.docVIP

消防系统知识（Fire system knowledge） Fire system knowledge System flow order: Wet alarm valve --- riser --- cross dry pipe ---- signal valve --- water flow indicator --- cross dry pipe --- nozzle --- the most end nozzle --- pressure gauge --- stop valve - end water test valve Pump adapter Pump adapter for high-rise building is supporting according to the code for fire protection of high-rise building fire safety facilities. It is usually connected to the water supply system of fire fighting equipment such as sprinkler system or hydrant in building. The utility model relates to a device for connecting a fire engine to the pressurized water supply of an indoor fire water supply system, one end of which is provided with a fire water supply pipe network and a horizontal dry pipe is led out, and the other end is arranged in a place where fire engines are easy to approach. When a fire occurs, the fire engine pump can quickly and conveniently through the interface and building the adapter in the fire fighting equipment is connected, and the water pressure, so the indoor fire equipment pressure with sufficient water to extinguish, different floors of fire, effectively solves the problem of building fires, fire fighting because of difficulties or indoor fire fighting equipment due to lack of adequate water pressure to the fire. The ground type, underground type, wall type and so on Selection of products 1) the specifications shall be selected according to the design, including wall type, ground type, underground type and multipurpose type. 2), the installation position should be clearly marked, the position of the valve should be easy to operate, one near no obstacle. 3), the safety valve should be according to the working pressure of constant pressure, high pressure to prevent fire damage to indoor pipelines and components should be equipped with a discharge valve adapter. Main points of construction and installation 1) the unified test pressure is 1.5 times of the work pressure,