端口的关闭(献给同样是菜鸟的你)(The port is closed (for the same rookie you are)).docVIP

  • 1735
  • 0
  • 约2.12万字
  • 约 36页
  • 2017-07-28 发布于河南
  • 举报

端口的关闭(献给同样是菜鸟的你)(The port is closed (for the same rookie you are)).doc

端口的关闭(献给同样是菜鸟的你)(The port is closed (for the same rookie you are))

端口的关闭(献给同样是菜鸟的你)(The port is closed (for the same rookie you are)) 23 port closed (easy to fully control the computer): 1, my computer, right, 2 find service, 3 in the right side of the service to find telnet. 4 ban. 25 ports can do this: first, open the control panel, double-click the administrative tools, and then double-click the service. Then in the service window to find and double-click the Simple Mail Transfer Protocol (SMTP) service, click the stop button to stop the service, and then in the startup type select disabled, then click OK button. In this case, shutting down the SMTP service is equivalent to shutting down the corresponding port. 137-138.445 port closing method: right click - network neighbor - property / local connection - attributes, in the Microsoft network client before the hook removed, which will turn off the 445. Then also the Microsoft network files and printers share the hook also removed, then shut down 137-138. 139 port right point network neighbor - Property - local connection - properties click Internet / (TCP/IP), then point below properties - point advanced. At the top of the column appears the IP settings / DNS/WINS/ option, then click WINS, and below, there is the NETBIOS setting, change the default to the TCP/IP on the disabled NETBIOS, and make sure Close the 445 port open the registry, find the HKEY LOCAL machine \\machine\\system\\currentcontrolset\\srvices\\netbt\\parmeters\\ to create a name for the ambdebiceenabled DWORD value in the parameters sub item below, set to 0 on the line Turn off the 3389 port: right-click My Computer and remove the hook that allows my computer. Attach a function of each port: turn off when you dont use it Port 0 Service Reserved Instructions are usually used to analyze operating systems. This method works because in some systems, 0 is an invalid port, and when you try to connect to it with the usual closed port, different results are produced. A typical scan, using the IP address of , setting the

文档评论(0)

1亿VIP精品文档

相关文档