华硕路由器远程打印机LPD设置Windows.pdf

FAQ How can I set the printer by Line Printer Remote (LPR)/Line Printer Daemon (LPD) in Windows OS with the ASUSWRT firmware of ASUS wireless router? Category How can I use EZ printer sharing in Windows OS with the ASUSWRT firmware of ASUS wireless router? How can I set the printer by Line Printer Remote (LPR)/Line Printer Daemon (LPD) in Windows OS with the ASUSWRT firmware of ASUS wireless router? How can I set printer by Line Printer Remote (LPR)/ Line Printer Daemon (LPD) when I am using a MAC OS? Content For the compatibility of the printer, please refer the link below. /event/network/Printer_Server/ Notice: The model which doesnt include in the support list may have compatibility issue. Note: If you have already installed the printer locally in your computer, right-click the printer icon then select Property Port tab to add a standard TCP/IP port. Click Add Port. Select Standard TCP/IP Port then click the New Port button. Refer to steps 5-8 for the setting procedures. 1. Run the Add Printer Wizard from Start Devices and Printers Add a printer. 2. Select Add a local printer then click Next. 3. Select Create a new port then set Type of Port to Standard TCP/IP port. Click Next. 4. In the printer names IP address field, type the IP address of the wireles router then click Next. 5. Select Custom then click Settings. 6. Set Protocol to LPR. In the Queue Name field, type LPRServer then click OK to continue. 7. Click Next to finish setting the standard TCP/IP port. 8. Install the printer driver from the vendor-model list. If your printer is not in the list, select Have Disk to manually assign the drivers location. 9. Click Next to accept the default name for the printer. 10. Click Finish to finish the installation process and exit the Add Printer Wizard. Feedback Does this document solve your problem? Yes No What can we do to improve this document? To protect your privacy, please DO NOT include