参数：管径φ13~φ38.DOC

TY125型高频焊管技术参数 Technical configuration of TY Equipment 主要技术规格Main technical specification 原材料(钢带)条件钢带材质：热轧或冷轧低碳钢；； Raw material request Material of striphot-rolling or cold-rolling mild steel 2、成品要求 圆管 直径：φ～φmm 壁厚：～.0mm Requirement finished product Round pipe Diameter：φ～φmm Wall thickness：～.0mm 3、 机列要求 机列形式：分体式； 机组生产速度：0～0m/min Requirement of lay Line form: Separated type Rated speed：0～0m/min 工艺流程 开卷→剪切对焊→卧式螺旋活套→校平→轧制成型→高频焊接→刮刀→冷却 →定径→矫直→飞锯切料→下料台Technology flow Uncoiling-Shearing and butt welding-Horizontal type strip accumulating-Leveling-Forming unit-High-frequency welding-Deburring-cooling-Sizing unit-Straightener-Flying saw-Run-out table 焊管线主要构成规格Main structure 1、开卷机 结构形式 ：采用（单头）液压涨缩装置，能更快更换刚卷； 适应钢带内径 φ508mm 钢带外径：≤φ1600mm 钢带宽度：50～mm 钢带卷重：≤ 制动形式：气动、强弱制动° Uncoiling Configuration: hand rocker expanding drum, double drums; Suitable inner Diameterφ508mm Outer Diameter of coil:≤φ1600mm Width of metal strip:150～mm Weight of coil：≤Brake type: air drive, two phase brake 2、（助卷）整平.直头机； 主卷：由液压缸带动，可以上下摆动及伸缩，压送辊由电机带动（4KW） 直头机铲头机伸出把带钢娇直引入整平机、 整平机：采用2.2kw电机上下压紧、送料电机1kw，7辊整平 Leveling and straightening machine Master file: Driven by the hydraulic cylinder, can shrink bobbing, press roller dried by motor (4kw) Straightening and end-cutting machine straighten the steel strip and introduce it into leveling machine. Flatten machine: adopt 2.2kw power to compact up and down, feeding Motor (15kw), seven rollers leveling. 3、剪切对焊机(液压式龙门剪) 作用：1.切除钢带头尾的缺陷部分以及带卷中间的缺陷部分； 2.在对焊前切头切尾，使对焊接头平直对正，利于对焊； 结构形式：液压剪+焊接 钢带对缝形式：采用（4KW）电机驱动，前后各台电机 剪切厚度：: ～.0mm 最大剪切宽度：: 00mm 刀片材料：: T12A 刀片刃数：: 2 Shearing and butt welding machine (hydraulic pressure square shear) Function: 1. Cut off the defect parts at two ends and middle; 2. Cut off the ends before welding to make connected ends flat and good for welding. Type: hydraulic pressure shear + welding Opposite joint type for steel