Advanced Forming Methods and Materials in （先进成形方法和材料）.pdf

Advanced Forming Methods and Materials in the Automotive Industry Detroit, December 10-11, 2014 Preliminary agenda, December 10 8:15 a.m. – 9:00 a.m. Registration – Coffee and refreshments 9:00 a.m. – 9:10 a.m. Introduction to the seminar Presented by Mr. Adam Allansson, President, APT North America PRESS HARDENING 9:15 a.m. – 09:35 a.m. Transitioning to Lightweight Materials – the role for Hot Stamping Presented by Mr. Mark Stevens, Project Manager, Center for Automotive Studies 9:40 a.m. – 10:00 a.m. Challenges within the metal forming industry Presented by Mr. Per Josefsson, Vice President, Marketing and Sales, APT 10:05 a.m. – 10:25 a.m. Advanced Methods for Forming AHSS and Ultra High Strength Al Alloys Presented by Professor Taylan Altan, Center for Precision Forming (CPF), The Ohio State University 10:25 a.m. – 11:00 a.m. Break – Refreshments – Networking PRODUCTION SOLUTIONS AND STRATEGIES 11:00 a.m. – 11:20 a.m. Profitable production solutions Presented by Mr. Johan Friberg, Senior Advisor, Marketing and Sales, APT 11:25 a.m. – 11:45 a.m. Virtual hot forming – Benefits, capabilities and illustrated workflows Presented by Mr. Harald Porzner, Director Product Management Virtual Manufacturing/Product Manager Precision Forming, ESI North America 11:50 a.m. – 12:10 p.m. Tool steel for hot stamping Presented by Ms. Patricia Miller, Senior Technical Manager, Bohler-Uddeholm Corp. 12:15 p.m. – 12:35 p.m. Advanced coatings Presented by Mr. Paul Montgomery, Product Manager Metal forming, Oerlikon Balzers Coating Inc. 12.35 p.m. – 1:45 p.m. Lunch ADVANCED FORMING METHODS AND MATERIALS