AERZEN USA - Ohio Water Environment （俄亥俄州AERZEN USA -水环境）.pdf

AERZEN USA Efficiency Comparisons Between Aeration Blowers Evaluation of Blower Technologies Introduction  Aeration System  Largest Consumer of Power in WWTP 50% to 60% of plant operating cost  Life Cycle Costs far exceeds Initial Capital Costs Evaluation of Blower Technologies Introduction  Purpose of Presentation  Evolution of Blower Technologies  Matching the Technology to the Application  Right-Sizing of Blowers Accurate Evaluation of Overall Costs Evaluation of Blower Technologies Traditional Blower Technologies  Two Lobe Positive Displacement Variable Speed  Multi-Stage Centrifugal  Inlet Throttle Valve or Guide Vanes Variable Speed Evaluation of Blower Technologies PD Blower Design Principles  Positive Displacement Blower  Constant volume against varying pressure  Flow changes by varying speed with VFD  Large Turndown (Typically 4:1)  Easily adapts to changes in pressure temperature  Widely used / Low initial cost Evaluation of Blower Technologies PD Blower Evolution  Two-Lobe to Three-Lobe Technology  Pulsation Cancellation Less wear and tear on components and piping  Single Forging of Shaft and Impeller Stronger, More Stable at Higher Speeds  More Effective Noise Reduction Quieter packages  Upgraded Seals (Piston Ring) Longer maintenance intervals on internals Evaluation of Blower Technologies 2-Lobe Conveying Cycle Atmospheric pressure