Accutron Inc.（电子手表公司。）.pdf

Accutron Inc. ICT TEST, FIXTURE AND PROGRAMMING REQUIREMENTS ACCUTRON INC CONTRACT MANUFACTURER 149 ADDISON ROAD, WINDSOR, CT 06095 PH (860) 683 8300 FAX (860) 683 8301 TB002 Revision A ICT Test, Fixture Programming Requirements This bulletin is intended to provide general information on In-Circuit Test (ICT) and to document a basic set of requirements that need to be met in an effort to facilitate the production of an In-Circuit Test fixture and program for a given PCBA. Included are sections on assumptions made when providing ICT quotations, Test Program coverage and content, Material and Documentation needed to provide and ICT fixture/program, a limited glossary of terms related to ICT and a section on Data and File Formats and transfer. Portions of these guidelines are excerpted from documentation published by Teradyne Inc. and TTI Testron and are copyrighted by them. I. ASSUMPTIONS AND GUIDELINES Due to the custom nature of individual test fixtures and programs, quotations are estimates of typical costs and schedules based on the information provided to us. Additional costs may be incurred if the information and materials provided are insufficient or inaccurate. Accordingly, any quotation is for budgetary purposes only. The following assumptions and guidelines should be used during the design and layout of the circuit board as well as when requesting an ICT quotation. This will allow consideration to be made for all items that may affect testability and fixture/programming costs. See TB001 Designing for Testability Guidelines for more