ATTUATORI EUROPE（ATTUATORI欧洲）.pdfVIP

ATTUATORI EUROPE PNEUMATIC ACTUATORS AND ACCESSORIES WARRANTY G.T. Attuatori S.r.l. guarantees its pneumatic actuators for one year from the date of delivery. The warranty covers any defects in materials manufactured by us. Under this warranty, G.T. Attuatori S.r.l. will either repair or replace any part, ex works. The warranty is null and void in the following cases: - Incorrect installation of the product; - Use of the product for purposes other than those for which it is designed; G.T. Attuatori S.r.l. does not recognise any other warranty, voiced or implied, outside the above indicated. In the same way, G.T. Attuatori S.r.l. declines any responsibility for direct or indirect damages, of any type or nature, deriving from its products or their use. INSTRUCTION MANUAL Pneumatic pinion actuators and racks SERIES GTKB, GTXB, GTWB EC EXAMINATION CERTIFICATE TYPE no. CESI 07 ATEX 049 X 1.0 INTRODUCTION 2.0 STORAGE 3.0 OPERATIONAL FEATURES 4.0 ACTUATORS INSTALLATION 5.0 DISASSEMBLY PROCEDURE 6.0 MBLY PROCEDURE 7.0 SPRING CARTRIDGES INSTALLATION 8.0 FCCW TO FCW CONVERSION 9.0 ACTUATOR SIZING 10.0 AIR TO AIR ACTUATORS 11.0 SPRING RETURN ACTUATORS 1.0 INTRODUCTION Conceived for the installation on valves of The actuators of the GTK SLS and GTX single limit stop series and GTK DLS and GTW double limit stop series with possibility of adjustment of the rotation both in opening that in closing are manufactured to operate with a maximum pressure of 10 Bar., and tested for an operational life up to 1 million of manoeuvres. The greasing performed during the assemblage guarantees a correct lubrication of the actuators for at least 500.00