Concepts I Tolerances, Limits, Fits and Surface （概念我公差,限制,适合和表面）.pdf

Concepts I Concepts I Tolerances, Limits, Fits and Tolerances, Limits, Fits and Surface Finishes Surface Finishes th Tuesday 6th Week Tuesday 6 Week Kogan #2 Redo Feedback Kogan #2 Redo Feedback 50% of those eligible redid assignment 50% of those eligible redid assignment n Those who did not continue to make poor n Those who did not continue to make poor decisions decisions All but one person of those attempting All but one person of those attempting assignment again raised their grade to a C assignment again raised their grade to a C – excellent. – excellent. 1 Tolerances Tolerances (In week 2 we spoke briefly about Tolerances) (In week 2 we spoke briefly about Tolerances) No feature of a component can be perfect (i.e., no No feature of a component can be perfect (i.e., no surface flat, no hole round etc), because of the surface flat, no hole round etc), because of the manufacturing process manufacturing process Thus, when dimensioning any feature Thus, when dimensioning any feature nn Basic nominal dimension Basic nominal dimension nn Permitted variability (tolerance) Permitted variability (tolerance) nn Dimensions should be given in as large a tolerances as possible Dimensions should be given in as large a tolerances as possible without interfering with the function of the part to reduce without interfering with the function of the part to reduce production costs. production costs. 20,15 20 + 0,15 20 ± 0,01 19,99 - 0,01 Limits Bilateral Unilateral