工程测量_计算题（Engineering measurement _ calculation）.docVIP

工程测量_计算题（Engineering measurement _ calculation） Calculation questions bank and reference answer 1, set A point elevation of 15.023m, to test the design elevation of 16.000m for the B points, the level placed in A, B, between two points, read A When the ruler reads a=2.340m, B feet, and the reading number is B, the height of the foot bottom is B point elevation. [level] the level of the instrument is 15.023+2.23=17.363m, then the B foot reading should be.IH B=17.363-16=1.363m, at this time, the elevation of B feet zero is 16m. 2, in the 1: 2000 topographic map, measured a distance of =23.2cm, i