深圳力豪机械设备有限公司 新型空气送料机 Air Feeder 快Fast 慢Slow.DOC

深圳力豪机械设备有限公司 新型空气送料机 Air Feeder 快 Fast 慢 Slow 速度调整螺丝 Speed Adjusting Screw 固定夹板 Fixed Clamp 移动夹板 Moving Clamp 道轨 Guide 进料滚筒 Roll 送料长度微调螺丝 Feeding Length Micro-adjusting Screw 固定孔 Fixed Hole 向道杆 Guide Pole 排气孔Exhaust Hole 弯头 Elbow 空气阀 Air Valve 开 On 关 Off 快速接头 Fast Coupling 送料长度调整螺丝 Feeding Length Adjusting Screw 挡料同 Material Retainer 气动缓冲器 Pneumatic Buffer 标准型特点介绍 主体中心大孔研磨后电镀，能更好地保证中心大孔的圆柱度和直线度，因此中心大杆的运动更加顺畅。 主体在加工后一律经过防锈处理，装配之前进行超声波清洗，确保机器不会因为加工残留物而产生故障。 可更换式换向阀，采用大圆角结构，内孔经镜面抛光处理，大大提高了送料机的送料速度和密封圈的使用寿命。 所有的密封件均采用日本进口品牌。 新式浮动杆采用二位三通阀结构，完全解决了浮动杆位置容易漏气难题。 采用两组气压缓冲器，可以自动吸收空气送料机使用过程中的惯性冲击，有效降低了震动和噪音。 导轨采用高强度钢经热处理后镀硬铬处理，移动体与导轨配合处精磨处理，使得移动体运动更加灵活平稳； 所有螺丝安装时都采用高强度压氧胶，因此不会因为长时间的使用过程中的震荡而松动，而且能达到很好的密封效果。 整体结构紧凑、精度高、速度快、美观实用；所有机器出厂前均经过严格的测试，一年内有质量问题（人为因素、密封圈正常磨损除外），可以无偿退换新机。 　　 任意尺寸及长度均可订做. 一年内有质量问题（人为因素、密封圈正常磨损除外），可以无偿退换新机。 Air Feeder Conventional Model Instruction The central hole of the main structure is by lapped finishing first and then electroplating so as to better ensure its roundness and straightness, which thus enables the core shaft to run smoothly. After processed, the main structure goes through anti-corrosive treatment, and then it is cleaned through ultrasonic wave before assembled so as to guarantee trouble-free when processing leftover materials. The exchangeable reversal valve is constructed large circular angle and its internal bore goes through mirror polishing treatment so as to greatly improve feeder’s loading speed and the life span of sealing ring. All the sealing parts are introduced from Japan. Two-position three-way valve structure is adopted in the new floating lever, and thus gas-leaking problem is solved. Two units of pneumatic cushions are adopted to efficiently reduce vibration and noise. The guiding rail is processed through hard chrome plating finish after going high tensile steel heating process. The connection between mobile part and guiding rail goes through accurate grinding so as to make machine moving and its motion flexible and sta