原理Principles.pdf

Mould we lder / Laser welder series 原理 Principles 激光模具烧焊机是通过激光瞬间产生的高热能将专用焊丝熔接到模具的破损部位，与 有基材牢固熔接，焊后经电火 花，磨削等加工成光面，从而修补模具。奥华激光模具烧焊机是依托多年的激光焊接开发经验，专为模具行业量身定 做的专用机型。对模具砂眼、裂痕、崩角、及磨损等微小部位进行精密修补。广泛用于手机、数码、汽车等模具行 业，可补各种模具钢、铍铜、紫铜和极硬合金材料。热影响区域小，不会导致精密模具变形。焊接深度大，焊接牢 。 固。溶化充分，不留修补痕迹。溶池溶料凸起部份与基体结合处无凹陷现象 Laser mould welding machine is use the high energy of heat that instantaneously produced by laser to melt the special-purpose welding wire and connect it with the damaged parts of the mould , so it can connect with the original material firmly, after that there will form a refacing by electric spark and grind cutting and some other processing and so the mould is repaired. Aohua developed special type of laser mould welding machine for mould industry on the base of several years experiences of laser welding development. It can repair tiny parts of the moulds such as blisters, crack, burst pieces and attrit ion precisely. It is widely used in the industries of mobile phone, digital, car and so on. It can repair all kinds of mould steel, beryllium copper, red copper and extremely hard alloy material. Small heat affected zone can avoid mould deformation. Deep welding makes the connection firm. Sufficiently melting leaves no repairing traces and no concave slot on the j oint between raised part and matrix 产品应用 Product application 主要用于S136，SKD-11，NA K80，8407，718，738，H13，P20，W302，2344等模具钢、碳钢、普通合金钢、不 锈钢、铍铜、紫铜和极硬合金材料的塑胶模具、铸造模、锻造模、冲压模、压铸模等。普遍应用于手机、数码产 。 品、汽车及摩托车等模具制造和成型行业 used to S136，SKD-11，NA K80，8407，718，738，H13，P20， W302，2344 titanium, nickel, tin, co pper, aluminum, chromium, niob ium, gold, silver, steel and their alloys. 产品优势 Product advantage 世界先进技术实力：奥华激光是国内首家推出激光模具修补设备的专业研发、生产和