2010.10 建筑结构学报用无机胶粘贴CFRP布加固混凝土板抗火性能试验研究.pdfVIP

31 10 2010 10 Journal of Bu ilding Structures Vol31 No10 Oct2010 013 : 2010) CFRP 郑文忠, 万夫雄, 李时光 (哈尔滨工业大学土木工程学院, 黑龙江哈尔滨 150090) : FRP, 600 FRP, 5 FRP FRP, ISO 834 15h, 10h FRP 90~ 300 , 1/438~ 1/95, FRP, : FRP, FRP , ; FRP, FRP : ; ; FRP; ; ; : TU3752 TU3171 : A Expermi ental research of fire performance on reinforced concrete slabs strengthenedw ith FRP sheets bonded w ith inorganic adhesive ZHENGW enzhong, WAN Fuxiong, LI Shiguang ( School of ivilEngineering, H arbin Institute ofTechnology, H arbin 150090, hina) A bstract: Softening temperature of organ ic epoxy adhesives used to bond FRP sheets is too low, so an inorganic adhesive is developed, the strength of wh ich at 600 is no less than that at room temperature. To investigate the feasibility that the inorganic adhesive takes place of organic adhesive in bonding FRP sheets, a fire test of five reinforced concrete slabs strengthenedw ith FRP sheetsbondedw ith the inorgan ic adhesivewas carried out, ami ing to mi prove fire performance of strengthened concrete structures. onsidering the strength of FRP sheets under non oxygen conditionw as hardly reduced at h ightemperature, the thicktyped fireproofing coating for tunnel (TF T) and thicktyped fireproofing coating for steel structure (TF SS) were selected to protect FRP sheets. Specmi ensw ere exposed to fire in according to ISO 834 standard fire curve for 15 hours, then the test datum were continuously recorded for another hour after ceasefire. The highest temperature of FRP sheets varied from 90 to 300 , and displacements atm idspan reached 1/4381/95 of the actual spa