基于abaqus的足骨有限元分析研究.pdfVIP

第22 卷 增刊2 计 算 机 辅 助 工 程 Vol. 22 Suppl. 2 论文所属行业:其他 基于abaqus 的足部有限元分析研究 周俊杰，郭朋飞 (郑州大学化工与能源学院，河南省，郑州市 450000) 摘要：通过Engauge 软件从CT 图像上提取出成年男子足部轮廓数据，根据得到的数据运用Solidworks 建 立足部模型，然后利用有限元软件 Abaqus 进行应力分析。经过人体站立及承受碾压力时足部受力情况的 分析,结果表明：成年男子站立时最大应力及变形均在跖骨，应力为0.919MPa，变形为1.19mm；足部承受 100N 碾压力时，跖骨的最大应力为2.635MPa，碾压力为1000N 时，跖骨的最大应力已达到23.572MPa。最 终得到结论，人体足部受到碾压时，跖骨极易出现损伤。 关键词：足部；Abaqus；有限元；应力分析 中图分类号：R6 Research on the Finite Element Analysis of Foot based on Abaqus Zhou Junjie,Guo Pengfei (Chemical and Engineering Institute of ZhengZhou Univercity, ZhengZhou 450000) Abstract ： Through the software Engauge extracting data of adult male’s foot contour from CT image. The foot model has been built based on the extacting data with Solidworks. Then the stress conditions of human foot have been conducted on analysis with finite element software Abaqus .Through the analysis when standing and under rolling pressure. The results show that when adult male standing, the maximum stress and deformation is at the metatarsal, and the stress is 0.919 MPa, the deformation is 1.19 mm;When human foot under rolling pressure of 100N, the maximum stress at the metatarsal is 2.635MPa, When human foot under rolling pressure of 1000N, the maximum stress at the metatarsal is 23.572MPa.the Conclusions have been drawn ：When human feet suffer rolling, the metatarsal is easily injury. Key words：foot; Abaqus; finite element analysis; stress analysis 在人体上操作的技术难题。人类足部的构造分为三 0 引言 个部分，即前足部、中足部、后足部。如图1 所示， 前足部为趾骨，人在步行时，以前足部抓住地面， 随着计算机技术的迅速发展，近年来，有限元 让身体前进。中足部为由第一至第五