5.0常用命令（5 commonly used commands）.doc

5.0常用命令（5 commonly used commands） Five Query network element type:: cfg-get-devicetype Query network element date:: date:set-date:2000-2-13 Query network element time: time (set-time:13*00*11) Query physical board:: cfg-get-phybd Query sheet version:: cfg-get-bdversion:Bid Query sheet version information:: cfg-get-bdverinfo:Bid Query wave patch:: patchpkg-get-pkginfo:all; Master backup status: (hbu-get-backup-info) query results must be 3 to manually switch Check the status of the master and main control board. Command: hsc-get-work Query all current cross connections: cfg-get-xc:0,0 : cfg-get-phybd; : cfg-set-lanswitch:54,1, open; / / open COM : alm-get-curdata:0,0; Logquery:48, bb0.log; / / data acquisition Log-query:48, bb0.log; : cfg-get-phybd; : cfg-get-board; : alm-get-curdata:0,0; : alm-get-hisdata:0,0; Log-query:48, bb0.log Log-query:48, bb1.log Log-query:48, bb2.log Log-query:48, bb3.log Log-query:48, bb5.log Log-query:48, bb4.log Log-query:47, bb0.log Log-query:47, bb1.log Log-query:47, bb5.log : errrlog; : errlog; Log-query:1, bb5.log Log-query:1, bb0.log : alm-get-curdata:0,0; : cfg-get-phybd; : alm-get-curdata:0,0; : alm-get-curdata:0,0; : alm-get-curdata:0,0; : cfg-get-phybd; Alm-get-curdata-ext:0, ALL, 0; / / wave current alarm : alm-get-curdata-ext:13, ALL, 0; : alm-get-curdata-ext:12, ALL, 0; : cfg-get-slotsysall; #72:lognew: szhw, nesoft; Cm-set-neid:: 0x900c0; / / set ne ID Cm-get-subnet: / / ID; query expansion Cm-set-ip:129.9.255.46: / / IP element set Cm-set-submask:255.255.255.224: / / set ne subnet mask : cm-get-eccroute; / / ECC query routing : cm-get-maccon; MAC layer connection of //ECC Query: cfg-get-phybd; / / physical layer : cfg-get-board; / / query logic board About channel loopback: : cfg-set-loop:6,16, loopout; : cfg-set-loop:6,16, noloop; / / VC12 loopback branch board : cfg-set-vc4loop:9,1,1, loopin; : cfg-set-vc4loop:9,1,1, noloop; / / VC4 circular plate Multiplex section protection switching class Command The multiplex section p