手动档汽车的换挡技巧（Shift skills for manual cars）.doc

手动档汽车的换挡技巧（Shift skills for manual cars） The history of the most full shift to explain the manual car shift skills There are many discussions on the Internet, and many aspects are involved. To sum up, I feel that nothing more than can be divided into two major categories, one is the timing of the shift, that is, when to add gear, when to reduce the file; two is the shift itself, including the shift of the throttle, clutch and so on. A strong subjectivity, belongs to the soft category, there are different answers to different situations, is anyones guess; after a problem is highly technical, relatively hard, have to follow certain rules of machinery. At present, automobiles and transmissions are equipped with synchronizer. After the transmission is equipped with a synchronizer, the gear impact is effectively avoided and the shift operation is greatly simplified. Now, whether or not upshift downshift, will use the traditional shift when the feet kick from legitimate and widespread use of legitimate (this should not be understood as the feet off the denial, this method) solves the difficulty of shifting to a great extent. So, but why still often hear some friends said their shift vehicles such as dash (channeling car), duncuo (rub the car) and the impact of the phenomenon? I think the problem lies in the shift operation on nine in ten. The following combination of theoretical knowledge and driving experience to talk about this problem To facilitate the discussion, I roughly split the foot shift from the correct shift process to the following three steps: The first step: step on the clutch, loosen the throttle; The second step: shift; The third step: lifting clutch, refueling. Which of these three steps might have an impact? Interview, step by step, analyze each step. The first step: step on the clutch, loosen the throttle This step could have an impact. The reason for the shock is that the clutch is loose and the order of the accelerator is not correct. If the first lo