怎样选购电烙铁（How to buy electric iron）.docVIP

怎样选购电烙铁（How to buy electric iron） Electric iron is generally divided into internal heating, external heating and fast heating, power from 20W, 25W, as large as several hundred watts. Purchase and selection should pay attention to, external heating type electric iron complex manufacturing process, low efficiency, high price, quick heat due to large transformers in hand, difficult operation; internal heating electric soldering iron has the advantages of simple structure, high thermal efficiency, light and flexible, is the first choice. Used as a decoration, IC type transistor radio recorders, TV sets, ordinary circuit experiment, generally should be 20W, repair vacuum tube machine, such as lining, old instrument, suitable for 35W, the external heating type is 45W, wiring, metal plate welding of large transformer on the ground lines are used 50W, internal heating type external heat type 75W, there are some more power occasions. The power of the electric iron must be chosen properly, otherwise the intended target will be wasted. Although the automatic constant temperature electric iron is many parts, the maintenance is difficult, the price is high, but it can guarantee the spot welding quality, especially when doing the circuit experiment and repairing a large number of printed boards, the effect is very good. The electric iron used in the production line adopts the method of automatic voltage regulation, and the cost may be lower at constant temperature. In some areas, the electricity is unstable, the iron is often not burned in tin, or the temperature is not enough, welding can not, in order to ensure the quality of brazing, only the use of automatic thermostat series of iron, or configure the pressure regulating system. Only the temperature is too high, and the series resistance is also possible. A few electric irons should be stored for different occasions. Electric iron use used by others, or to buy second-hand market iron, we must pay attention to quality, repeate