东莞激光焊焊接材料影响焊接加工性能的取决因素（Dongguan laser welding materials affect the welding performance of the dependent factors）.docVIP

东莞激光焊焊接材料影响焊接加工性能的取决因素（Dongguan laser welding materials affect the welding performance of the dependent factors） Dongguan laser welding materials affect the welding performance of the dependent factors The material factor is the main factor that affects the welding performance. Dongguan laser welding of metal refers to the degree of difficulty of obtaining high quality welded joints under certain welding conditions. Generally speaking, if a metal with a simple welding process can obtain high quality welded joints or meet the technical requirements, we can consider it good weldability; if a special process in order to avoid the defects, it is called poor weldability. There are many factors affecting welding performance in Dongguan, such as material factor, component factor, process factor, etc.. The development of things is determined by internal causes. Therefore, the material factors are the main factors that affect the welding performance of Dongguan. The material factors include the chemical composition of the base metal and the chemical composition of the welding material (welding wire, welding rod, gas shielded welding, etc.). In the material factors, the chemical composition of the base metal is East. When we see the sample sent by the customer and think about how to weld it, the first thing we should consider in our mind is the metal material of this sample. Or, when we were asked by the customer on the phone how the product was welded, the first thing we asked was what the material was, and then understood the chemical composition of the parent material. Secondly, the size of the workpiece thickness, etc.. For example, Aluminum Alloy welding, corrosion resistance Aluminum Alloy if, with high strength, good toughness and section characteristics, will choose suitable welding and laser welding processing technology, to obtain good performance of aluminum welding process. If the welding materials are not chosen properly, cracks, pores and other defects will occu