喷墨打印机常见故障分析及诊断（Analysis and diagnosis of common troubles in ink jet printer）.docVIP

喷墨打印机常见故障分析及诊断（Analysis and diagnosis of common troubles in ink jet printer） Analysis and diagnosis of common troubles in ink jet printer Inkjet printers are widely used and may encounter problems in use, resulting in poor printing or even printing. The maintenance of ink jet printer should follow the principle of simplicity to complexity. The common troubleshooting methods are as follows. First, the printer after boot without any response The power supply is poor, the power cord is not connected firmly. Turn off the printer, check the power supply is normal, check the switch power supply whether there is voltage output, re connect the power line, to ensure that the plug is firmly inserted. 1. printer power circuit damage Should focus on checking the power circuit switch tube, power supply, thick film block, zener diode, gas terminal voltage regulator is damaged, under normal circumstances, the switch is more common damage. 2. when the print command is issued, the printer does not respond, or the indicator flashes but does not print The data line is not firmly connected or open. Reconnect the data line to make sure the interface and plug are securely secured and check whether the belt cable is properly connected and try to replace the data line if it cannot be ruled out. The amount of waste ink accumulated by the 3. counter reaches the upper limit Ink jet printers generally have a waste ink pad, used to absorb the print head cleaning out of the waste ink. The amount of ink consumed by the printer is controlled by the main board, and the counters overlap each time the ink (waste ink) is consumed by the cleaning print head. When the amount of ink accumulated by the counter reaches the required upper limit, the printer will stop working to prevent the waste ink from falling into the printer. The solution is to replace a new waste ink pad and reset the waste ink counter. 4. printing document capacity is too large, printer memory is insufficient Inkjet printers are not s