手机按键的制作工艺（Process for making mobile phone button）.docVIP

手机按键的制作工艺（Process for making mobile phone button） Process for making mobile phone button Production process General silicone rubber generally used for laser engraving, plastic + silica gel, silica gel IMD+, assembled elastic conductive film and a metal conductive film, bonding surface spraying, can choose a variety of colors according to the aesthetic requirements, according to the special needs of the assembly, economic benefits Laser engraving light effect: font light transmission, improve product value Film: a short thin, fine structure, simple assembling, never wear, allowing 3D design and a variety of colors and patterns, and the keys can be polyester film (or metal) light switch, assembly to reduce assembly time and cost Plastic + silicone: plastic and silicone combine to achieve a soft feel and wear-resistant effect At present, this process is more widely used, Film + silicone: special surface coating or plating process with high quality metal injection molding and assembling products silicone cap. Special treatment: Two color injection, plus plating: but the cost of two-color mold can be much higher than ordinary! Using P + R method, based on the use of different processing also has different effects, and then design time can be selected according to needs: such as by sputtering, mirror oil printing or drawing and so on Mobile phone surface technology: IMDIML IMD (In-Mold Decoration) is a new technology in which Film film is placed in the injection mold to decorate the surface of the plastic. IMD currently has two kinds of manufac