推土机故障排除5实例（5 examples of bulldozer troubleshooting）.docVIP

推土机故障排除5实例（5 examples of bulldozer troubleshooting） To insure it, put a new transmission pump, but the trouble has not been ruled out. Finally, it was found that there is oil leakage in the oil suction port of the steering pump, which is caused by loosening the fastening bolts of the tubing. By analysis, the transmission oil machine and steering circuit sharing a strainer, and turned to the suction pump in the pump suction port, transmission in; when steering pump oil pipeline leak, shut down after a period of time without the oil strainer, which starts with variable speed pump suction air this is the real reason, the block. After replacing the O ring of the oil suction port of the steering pump and checking the suction hose of the steering pump and fastening it, the trouble can be eliminated. (3) the oil temperature of hydraulic torque converter is high. When a TY165B hydraulic mechanical bulldozer works, the hydraulic torque converter has a high oil temperature fault. First carries on the analysis on the hydraulic pipeline of hydraulic transmission, hydraulic transmission pump through a coarse filter from the transmission oil, and then through the fine filter supply transmission control valve (including the regulation of safety valve and hydraulic torque converter valve); safety valve through the hydraulic oil to adjust the safety valve pressure after losing to. The torque converter is imported, the opening pressure is 0.75-0.85MPa, used to control access to the hydraulic torque converter; through the valve oil lubricating liquid into the loop, then lead to the converter valve, the valve pressure is 0.20-0.30MPa; the hydraulic oil provided by the control valve, safety valve into lubricating gear for the cooler cooling (pressure 0.12MPa). Because the hydraulic transmission pump from the transmission oil, so check the transmission oil level and temperature, were normal; then the transmission control valve, hydraulic torque converter safety valves, hydraulic torque c