07700103-胡启庆-基于LED照明智能路灯设计.docVIP

学 号毕业设计说明书 基于LED照明的智能路灯设计 学生姓名 胡启庆 专业名称 电子信息工程 指导教师 王悦 电子与信息工程系 2011 年6 月1 日 基于LED照明的智能路灯设计 The Design of Intelligent Lights Based-on LED Lighting 摘 要 随着我国的经济高速发展，对电的使用日益升高，因此造成了电能的浪费。目前国内路灯照明光源一般采用高压钠灯金属卤化物灯等。常出现开关灯不定时的现象，不但造成了电能的浪费、影响人们日常生活、影响社会治安以及造成一定程度的交通安全隐患。因此带来了很多不好的后果。 伴随着城市发展的不断伸展，现有的路灯控制方法已远不能满足城市路灯发展与控制的需要，所以采用先进的科学技术进行有效的控制和管理，已经成为了必然。在当代路灯发展技术，智能控制路灯上显然很是重要的。本设计基于光敏电阻的控制原理，设计了一个基于LED路灯智能控制系统，实现LED路灯的智能控制。本系统主要由光敏检测模块、噪声检测模块、时钟电路、继电器开关、外置恒流源模块、LCD显示模块以及ZigBee无线模块组成，应用STC89C52单片机控制，通过对LED路灯的模拟控制，为最终的实际应用提供参考依据。并分析了研究过程中出现的问题，逐步找出LED路灯智能控制系统的最佳设计方案。 关键词：LED路灯；光敏检测模块；噪声检测模块；恒流源驱动模块；89C52单片机； ABSTRACT With Chinas rapid economic development, the increasing use of electricity increased, therefore, it resulted in waste of energy.?Currently street lighting commonly used high-pressure sodium lamp metal halide lamp.?Switch lights often appear from time to time phenomenon, caused not only a waste of energy, affecting peoples daily lives, affecting social order and to a certain degree of traffic safety problems.?So bring a lot of bad consequences.? With the continuous stretch of urban development, the existing street light control method has been far from city lights can not meet the needs of development and control, so the use of advanced science and technology for effective control and management is the inevitable.?Development of technology?in modern?lights,?street lamps?on the?intelligent control?is very important. The design is based on photosensitive resistor control theory, which is based on LED lighting design intelligent control system, intelligent control of LED lights.?The system consists of photosensitive detection module, the noise detection module, the clock circuit, the relay switch, an external current source module, LCD display module, and ZigBee wireless module, application STC89C52 MCU control, LED lights through the analog control for the final?reference for the practical applications.?And analyzed the problems in the research