系统英文 对应中文（System English corresponds to Chinese）.docVIP

系统英文 对应中文（System English corresponds to Chinese） The first step is kps: The so-called KPS, means that the computer at startup time first read CD-ROM, so if CD-ROM is in the KPS function of the CD-ROM will be time for the drive to read out (such as the time before starting the installation system from CD). Setting method: 1. start the computer and hold down the DEL key until the BIOS settings window (usually blue background, yellow English) appears. 2. select and enter the second item, BIOS SETUP (BIOS settings). Find items or groups containing BOOT text in them, and find the three FIRST, SECEND, THIRD, followed by start of the first item, second startup and third startup. Here, we set them in sequence as CD-ROM, floppy disk, hard disk. (as in the page did not see the three E article, usually BOOT on the right side of the menu options for SETUP, then press enter to see) should choose FIRST hit the Enter key, select CD-ROM in the menu. Press the Enter key again 3. select a good start mode, press the F10 button, appear E text dialog box, press the Y key (omitted), and enter, the computer automatically restart, to prove that the change is effective. The second step is to install the XP system from the CD Before you restart, place the XP installation disk and press enter when you see the word CD at the bottom of the screen. KPS can be achieved, otherwise the computer began to read the hard disk, or skip KPS from the hard drive. After the XP system disk is KPS installation interface blue background, then the system will automatically analyze computer information, do not require any action until the screen goes black look, followed by a blue background Chinese interface. The first thing to do is the XP system protocol, and press the F8 key (which represents the agreement), then you can see the list of all partitions of the hard disk, and there are instructions in chinese. Select the drive, press the D key to delete the partition (before I remember first useful C disk file