提升架示意图（Lift frame schematic）.docVIP

提升架示意图（Lift frame schematic） Abstract: the article introduces the sea CangMingDa glass conjoined silo sliding construction assembly, slide up the construction process, and which were liable to occur during the construction of the platform tilted, offset, reverse, and so on and so forth timely processing methods are put forward. Key words: sliding mode construction; Assembly; rectifying 1 project overview Xiamen sea CangMingDa glass industrial park for foreign engineering projects, the silo project consists of three major diameter 12. 46 m l circular reinforced concrete silo, the right attached to a square reinforced concrete elevator shaft and a square reinforced concrete staircase, high silo is 36. 2 m, 3. 8 to 18. The wall thickness is 300 mm, between 0 m 18. 0 ~ 40. 0 m wall thickness is 220 mm, between the lateral wall. At the elevation of 12. 9m, 18. 0m and 40. The top elevation of the elevator shaft is 47. 21m, the wall thickness is 220mm, the concrete design is C30 commercial concrete, and the total amount of concrete works is 2998m3. 2. Sliding mode construction technology Sliding system to assembly - try to steel binding, concrete casting and appearance to receive light slippery rise - system - 17. 0 ~ 18. The 1 m elevation period of slide empty - 12. 9 m and 18. 0 m reinforced concrete platform construction to slippery rise system reorganization, normal process slippery rise to 39. The 40 m - elevator well up to 47. 10 m - round library stair climbing to 40. 0 m - flat pallet construction and demolition system. 3 construction of sliding mode 3. 1 sliding system assembly The assembly sequence of the sliding system is: the opening frame, the inner and outer template ring, the template, the operating platform, the hydraulic system and other equipment. 3. 1. 1 open frame Hoisting frame adopts open word, its stand on USES 48 x 3. 5 steel pipe welded mesh, mesh height 2400 mm, 200 mm wide, fluctuation beam adopts double channel [10, M16 bolts. Open word stand