板凳筋详（Bench muscle accurately）.docVIP

板凳筋详（Bench muscle accurately） Horse stool. Its main role is to support in between epithelial and hypodermis steel plate, conform to the requirements of the specification, to ensure that the two skin space between steel plate reinforced with steel bar stool, is to support vertical and horizontal direction distance of about 600-1000. The concept of horse stool tendon As the steel bench reinforcing steel bar is indispensable, from the technical and economic point of view sometimes is also important, it is not only the design category but also the construction scope is the scope of the budget. Some people who lack practical experience and perceptual knowledge tend to ignore and leak. The horse bench is not a simple concept, but there is no specific theoretical basis and data to this day, and there is no general calculation standard and standard, which is often based on experience and intuition. But the reason makes clear, also understand the actual construction, then calculate horse stool tendon is not a difficult thing. Anything that complicates simple things and simplifies complex problems is harmful. The horse stool, its shape like a stool, also known as the horse stool, also known as the brace. It is used for the upper and lower layers of steel bar, and the reinforcement of the upper plate is fixed. When the base thickness is large (greater than 800mm), it is not suitable to use the horse stool, but the stent is more stable and firm. Horse stool reinforcement on general drawing note, not only the individual designers design the horse stool, mostly consists of project engineer in the construction organization design detail clearly indicate its specifications, length and spacing, usually the horse of the specifications of the stool is smaller than plate stress reinforced a level, such as plate diameter ф ф 10 of the 12 available diameter steel bar to be a horse stool, of course, can also be the same as the plate steel. The distance between the vertical and the horizon