打印机设备故障代码（Printer equipment failure code）.docVIP

下载本文档

148
0
约9.96千字
约 12页
2017-08-03 发布于河南
举报
版权申诉

打印机设备故障代码（Printer equipment failure code）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

打印机设备故障代码（Printer equipment failure code） Explanation of maintenance failure code of konica minolta bizhub 211 (abstract) Author: tanmon01 release time: 2010-07-05 23:01:40 Konica minolta bizhub 211 failure code list The following information is taken from the Internet Fault code failure name detection sequence C0000 main motor failure ? The signal setting of the transmission motor is still H after the transmission of the motor. C0010 imaging unit motor failure ? After the operation of the imaging unit motor, the signal setting of the imaging unit motor is still H. ? After the imaging unit motor ceases to operate, the image is imaging The unit motor locking signal setting is still L. C0044 EDH fan motor failure? Please refer to the maintenance manual for details of the relevant purchase items. C0045 cooling fan failure ? After the cooling fan motor runs after the setting period, the cooling fan motor lock signal setting is still H. ? After the cooling fan motor stops running after the setting period, the cooling fan motor lock signal setting is still L. C004E power unit cooling fan failure ? After the power unit cooling fan motor runs after the setting period, the power unit cooling fan motor lock signal setting is still H. ? After the cooling fan motor in the power unit is stopped and the time is set, the power unit cooling fan motor lock signal setting is still L. C004F IU cooling fan failure ? The setting of the I/U cooling fan motor lock signal is still H after the setting period of the I/U cooling fan motor. ? The setting of the I/U cooling fan motor lock signal is still L. C0214 image transfer voltage anomaly ? The image transfer voltage is more than 100 V in the set period after the imaging unit motor is stopped. C0500 Fixing preheating Failure (main) ? In the first 30 seconds after the preheating cycle, the fixing roller thermistor fails to detect the required temperature, so the preheating cycle is not completed. ? During the preheating cycle, the temperatu