ansys如何生成adams模态中性文件.docVIP

11.3. Exporting to ADAMSAfter building the model in ANSYS (including all interface points), the next step is to invoke the ANSYS-ADAMS Interface to create the modal neutral file, Jobname.MNF. Creation of this file is driven by an ANSYS command macro called ADAMS.MAC.To start the interface, select the following GUI path.Main Menu Solution ADAMS Connection Export to ADAMSThe Select Interface Points dialog box appears first. From this dialog box, you must select two or more interface points.NoteDo not choose too many interface points since one point gives rise to 6 degrees of freedom in ADAMS. To