厂用工作电源与备用电源的正常切换方式探讨 Inquisition into Normal Switching Mode of Auxiliary Operating Power Source with Standby Power Source.pdfVIP

第27 卷 第9 期 电 力 建 设 Voi. 27 No. 9 ·56 · 2006 年9 月 Eiectric Power Construction Sep ，2006 厂用工作电源与备用电源的正常切换方式探讨 陈洪利，郭 伟 （东南大学，南京市，210096 ） ［摘 要］ 针对厂用工作电源与备用电源的典型接线，探讨厂用电的正常切换问题。当厂用工作电源与备用电源 属于同一电网，且两者压差与相角差均满足合环闭锁条件时，应采用并联切换方式；相角差不满足闭锁条件时，只能 采用串联切换或同时切换方式。当厂用工作电源与备用电源引自不同的电网，压差与频差满足闭锁条件时，应捕捉 两者相角差接近00 时进行并联切换操作；频差不满足时，应捕捉工作电源电压超前备用电源电压一定角度时进行同 时切换操作。 ［关键词］ 厂用电系统 切换方式 相角差 频差 中图分类号： TM621. 6 文献标识码：B 文章编号：1000 - 7229（2006 ）09 - 0056 - 04 Inguisition into Normai Switching Mode of Auxiiiary Operating Power Source with Standby Power Source Chen Hongli ，Guo Wei （South - east University ，Nanjing City ，210096 ） ［Abstract ］ Pointing to the typicai wiring of the auxiiiary working and standby power suppiies the author investigates into the normai switching of the auxiiiary power. As the auxiiiary working power and the standby power are subject to the same power network and both potentiai difference and phase angie difference have met the conditions of ciosed ioop biocking ，the paraiiei switching mode wiii be suitabie. As the phase angie difference can not meet the biocking conditions the seriai switching or simuitaneous switching mode can be used oniy. When the auxiiiary power suppiy and standby power suppiy are ied from the different power networks and the potentiai difference and freguency difference have met the conditions for biocking the paraiiei switching operation can be carried out as soon as the phase angie difference of both is ciose to 0 . Whiie their freguency difference can not be satisfied ，the sim