煲机王burn in cd（Burn in CD）.doc

煲机王burn in cd（Burn in CD） Introduction and instructions of Burn in CD Burn - in CD XRCD Whereas the record CD number: frxrcd-003 Many leyou see behind a large piece of text is too lazy to look at the (modern people too lazy to read a lot of word problems become more and more serious ^_^), so too xiao Lin in this simple explain why use the principle of the disc degaussing warm. This principle is to your home stereo system, at the start of signals from CD players, in the signal flow through all lines, more or less have some link field accumulated in noblesse oblige, and our human body channels and collaterals, blood vessels in some places a little narrow impassability is the same reason. This problem is the first - all of the audio components cant guarantee completely not magnetic, some power plug, horn, signal line plug, plug for nickel plating (bright appearance looks good) or internal use are magnetic screw (with a suction would rise in the sort of screwdriver) also are magnetic. The second? Horn points behind the audio from the speaker monomer magnet too close, or partials device on the bottom of the horn, but stand is made of iron, boring or lovers with some sense of magnetic iron beads do sand... shock and sound the horn, long performance will also decline. And the third? Here, by the way, some of the problems that some of you might not have noticed -- the maglev pad. Some of the people who use maglev pads dont know the seriousness of the problem, but of course, its a bad design. Design the right maglev mat is very good, to the performance of the sound system has its positive help, but too xiao Lins feel maglev mat only solves the (vibration) outside the buzzing, but Ann (internal vibration of an outlet) problem is not solved, please refer to our agent slingshot Yang crystal cone, poor design of the maglev pads, because of its magnetic field lines will leak problems, your sound is put up, for audio line began to sense magnetic, simple speak slowly failure sound