消防符号（Fire signs）.docVIP

消防符号（Fire signs） Firefighting technical documents with fire equipment graphic symbols GB/T 4327-93 The state technical supervision bureau approved the implementation of 1994-03-01, 1993-08-19 This standard is equivalent to the international standard ISO 6790-1986 {firefighting equipment graphic symbol. Theme content and scope of application This standard specifies the basic, auxiliary and independent graphic symbols for various types of fire fighting equipment in technical documents. This standard is applicable to the design, construction and review of the following fire protection works in new, reconstruction and expansion projects. A. Fire extinguisher symbols; B. fixed extinguishing system symbol; C. Fire supply line symbol; D. other extinguishing equipment symbols; E. Control and indication device symbols; F. Alarm start device symbol; G. fire alarm device symbol; H. Fire vent symbol; I escape route symbol; J. Fire and explosive danger zone symbols. 2. Basic principles 2.1 the graphic symbols of various types of fire facilities are generally composed of basic symbols and auxiliary symbols to form different graphic symbols. 2.2 the symbol used alone is a single symbol for use. 2.3 the proportion of all graphic symbols on the same diagram should be the same, and should be adjusted to the ratio of the figure. The size of the symbol should be suitable for microcopy. 3 basic symbols The class symbol represents the category of fire fighting equipment. Name of the number symbol 3.1 portable fire extinguishers Portable fire extinguisher ISO 6790-2.1 3.2 wheeled fire extinguishers Wheeled the fire extinguisher to ISO 6790-2.2 3.3 fixed extinguishing system (full submerged) Fixed fire - extinguishing system - Total protection of a room ISO 6790-2.3 3.4 fixed fire extinguishing system (local application) Fixed fire - extinguishing system - Local application ISO 6790-2.4 3.5 fire supply main line Fire main ISO 6790-2.5 3.6 other fire-fighting equipment Miscellaneous fire -